Back To Cisco Training Courses

CCNP Certification Training CBT Curriculum

Price: $599.00

CBT Course Overview:

The CCNP certification (Cisco Certified Network Professional) indicates advanced or journeyman knowledge of networks. With a CCNP, a network professional can install, configure, and troubleshoot local and wide area networks for enterprise organizations with networks from 100 to more than 500 nodes. The content emphasizes topics such as security, converged networks, quality of service (QoS), virtual private networks (VPN) and broadband technologies.

Total Training Duration:

56 hours

CBT Course Modules:

• Building Scalable Cisco Internetworks ( BCSI 2.0 ) CBT
• Building Cisco Multilayer Switched Networks ( BCMSN 2.1) CBT
• Building Cisco Remote Access Networks ( BCRAN 2.0 ) CBT
• Cisco Internetwork Troubleshooting ( CIT 5.0 ) CBT

Training Course Learnpics:

• Learn network layer elements of a scalable network.
• Learn benefits of IPv6.
• Learn circumstances for using static routing.
• Learn characteristics of a classful routing protocol.
• Learn characteristics of OSPF protocol.
• Learn OSPF protocol configuration methods and techniques.
• Learn features of OSPF routers, LSAs, and route summarization types.
• Learn guidelines for configuring OSPF on multiple areas and virtual links.
• Learn benefits of Enhanced Interior Gateway Routing Protocol (EIGRP).
• Learn the relationships between the Enhanced Interior Gateway Routing Protocol (EIGRP) database and the IP routing table.
• Learn considerations for performing Enhanced Interior Gateway Routing Protocol (EIGRP) metric calculation.
• Learn features of each communication type in a large network.
• Learn features of a Layer 2 switch.
• Learn features of routers.
• Learn features of VLANs.
• Learn differences between end-to-end and local VLANs.
• Learn guidelines for creating and deleting a VLAN in global mode.
• Learn features of transparent bridges.
• Learn how Spanning Tree Protocol (STP) prevents bridging loops.
• Learn the features of the BID that can be chosen as the root switch.
• Learn Cisco enhancements to Spanning Tree Protocol (STP).
• Learn the characteristics that apply to EtherChannel.
• Learn features of hardware redundancy.
• Learn features of redundant supervisor engines.
• Learn guidelines for configuring Route Processor Redundancy Plus (RPR+).
• Learn characteristics of IP multicasting.
• Learn the features of the Hot Standby Routing Protocol (HSRP).
• Learn the features of the proxy Address
• Learn characteristics of WAN connections.
• Learn features of circuit-switched connections.
• Learn features of packet-switched connections.
• Learn characteristics of modulation and demodulation.
• Learn features of cabling technologies.
• Learn modem modulation standards.
• Learn features of Point-to-Point Protocol (PPP).
• Learn commands used to enable Point-to-Point Protocol (PPP).
• Learn async interface commands for addressing on an asynchronous interface.
• Learn features of broadband technology.
• Learn features of Network Address Translation (NAT).
• Learn commands for translating an address.
• Learn features of cable technology.
• Learn features of digital signals over radio frequency (RF) channels.
• Learn features of cable technologies.
• Learn tasks for configuring the customer premises equipment (CPE) as the Point-to-Point Protocol over
• thernet (PPPoE) client.
• Learn components of a network configuration table.
• Learn characteristics of a network topology diagram.
• Learn guidelines for discovering network configuration information.
• Match Transmission Control Protocol/Internet Protocol (TCP/IP) model layers with their corresponding Open Systems Interconnection (OSI) model layers.
• Sequence the stages in the process of sending encapsulated data flows between end-systems.
• Match networking devices with their associated logical layers.
• Learn symptoms of problems that occur at the physical layer.
• Learn symptoms of problems that occur at the data link layer.
• Match Cisco commands used to isolate physical and data link layer problems with their functions.
• Learn commands used to resolve problems at the physical and data link layers.
• Sequence the steps to resolve a problem at the physical and data link layers.
• Sequence the steps to resolve a serial interface problem involving an inactive interface on a router.
• Much more.

Looking for more Cisco Certification Training?

Get CCNA, CCNP, CCDA, and CCDP for $1,499.00. For more info. click here.